|
|
Post by pmaier on Apr 2, 2013 4:39:03 GMT -8
After having the 1013 for a couple of days I started to get a Error 21 Electrical problem. I checked the site and they had a firmware there, not the right one, so it pooched the machine and it then gave a Version Error...error.
Sent an email to Oliver Tools and Judy sent me the 2.001 firmware and HMI file. I installed the firmware but not sure what to do with the HMI file as there are no instructions for that.
After installing the firmware, a couple things happened. The firmware is not exactly the same as the original that came with the machine. The original had speed choices of Low,Normal,High. This one has Low and High router, and Low and High carving.
The X and Y axis seem to have switched. All the jobs are rotated 90deg from what it was. (X is now the 13" axis of the table and Y is the 18" axis). (Update - Seems it may have always been like this. Ignore this part).
The origin when the machine homes is not the same.
The scale of the Y axis seems to be doubled of what it is supposed to be. So it is stretched along the Y axis.
The error 21 seems to be gone. So that's the good news.
Any ideas anyone? Phil.
|
|
|
|
Post by pmaier on Apr 2, 2013 8:39:12 GMT -8
Firmware 2.001 attached. Attachments:
|
|
|
|
Post by pmaier on Apr 2, 2013 8:40:23 GMT -8
HMI 2.001 attached. Stands for Human Management Interface, the keypad on the machine basically. Attachments:
|
|
tdac
New Member
Posts: 11
|
Post by tdac on Apr 2, 2013 9:40:31 GMT -8
Phil, I'm in the same boat. Flashed v1.004 and hosed the machine in the same way. They sent me the bin file and an instruction blurb on how to flash the HMI file, but forgot to attach the HMI file itself... I've attached the instruction document. Hopefully we can get these things back to operational. I was still waiting for the HMI file from Oliver, so thanks for posting your file. Cheers, Tony Attachments:
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 2, 2013 9:57:25 GMT -8
Here is a set of instructions sent to me by Dan at Oliver Machinery back in August 2012 for how to install the HMI file on 1013. Just make sure you are using a clean USB stick when loading either update, you want only the one you are working on to be on the stick, then re-format the stick and load the other. Attachments:
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 2, 2013 10:05:41 GMT -8
Maybe someone from Oliver can chime in as to what your display should read after successfully doing the updates, as I said this was sent to me in August 2012 so not sure if the versions are different now. Getting the updates done was the key to getting my machine up and running though because it would throw an error code every time I got it started up.
|
|
|
|
Post by pmaier on Apr 2, 2013 10:26:57 GMT -8
Thanks Bob. I'm trying it right now. Let me know if it works as I'm doing it a second time. Hit the Emergency Stop button while reaching for something  . |
|
|
|
Post by pmaier on Apr 2, 2013 10:52:03 GMT -8
It works as instructed. Now my firmwares are as follows:
HMIFILE:2.001.FP
FIRMWARE:2.001
I don't think my HMI firmware was wrong to start with anyway, fyi.
The current problem that remains that the Y axis is 3x what it's supposed to be. Say a job is supposed to be 120mm(X)by 120mm(Y), the Y axis will actually end up being 460mm on the carved project.
Any ideas ?
|
|
tdac
New Member
Posts: 11
|
Post by tdac on Apr 2, 2013 11:24:19 GMT -8
Hi Phil, Judy just emailed me a new firmware that is supposed to fix the issue. I won't be able to try it until I get home, but I have attached the file if you want to give it a go. Best regards, Tony Attachments:
|
|
|
|
Post by pmaier on Apr 2, 2013 11:36:32 GMT -8
Ya got it. Thx. Seems to be working. Resolved: Low,Normal,High is back. Y axis is no longer 3x the intended size. Origin Home is back to where it was. Thanks Judy and the engineer person.  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 2, 2013 11:37:26 GMT -8
Hope you guys finally got the right firmware update. Phil from your earlier post about x and y axis changing: the x axis is the 13" and the table y axis is the 18" on the 1013
|
|
|
|
Post by Greg on Apr 2, 2013 20:51:15 GMT -8
I had error 21 several times, the manual said to recheck the wire plugs to the main board after doing that I have never had it again.
|
|
tdac
New Member
Posts: 11
|
Post by tdac on Apr 3, 2013 5:32:00 GMT -8
2.002FH firmware fixed up my machine as well. Everything seems to be back to normal.
|
|
|
|
Post by pmaier on Apr 3, 2013 11:21:12 GMT -8
Here is a new HMI 2.002 that was sent to me by Judy. It doesnt appear to me to be any different. It would be nice to know what changes occur in the different versions: Attachments:
|
|
|
|
Post by gullyfoyle on Apr 6, 2013 8:45:55 GMT -8
I'm stuck.
Latest firmware,FIRMWARE2.002FH, gives me a version error.
HMI installation I can't find the jumper on the circuit board to remove.
Also get error 21 motion error after the version error.
Anyone with a better walkthrough?
Thank You
|
|
.
