Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 24, 2016 10:59:28 GMT -8
Prices and sizes on ebay just don't match up with what I'm looking for, usually I need a piece that is at least 13.5" long and the selection on ebay is really poor in that range.
Does anyone know of a source for corian that is reasonable? I've tried big box stores, they only carry corian in special order counters. I've tried local kitchen design places that only have scraps left over from their own projects. Not much help there either.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 26, 2016 1:44:18 GMT -8
Rick, I see on ebay some sheets that are 6" x 9", you can join those at the edges with super glue (not thick) by lightly scuffing the glossy edges for a good bond. The joint should not be visible as long as the edges are square and meet up cleanly and make sure you are on a flat surface. Pieces I have glued together would break before they came apart.
|
|
|
|
Post by donavann on Aug 15, 2016 0:54:23 GMT -8
Rick, I see on ebay some sheets that are 6" x 9", you can join those at the edges with super glue (not thick) by lightly scuffing the glossy edges for a good bond. The joint should not be visible as long as the edges are square and meet up cleanly and make sure you are on a flat surface. Pieces I have glued together would break before they came apart. thanks Bob for sharing this... www.texasbd.com/company/SEO-Resellers-USA-Wholesale-SEO-Services_18216844/ |
|
|
|
Post by gregory on Mar 17, 2017 2:32:00 GMT -8
  A canister I made using a corian lid I carved on my 1013, the glass knob is from an early 1900's chest of drawers. Just wanted to share a corian project. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 17, 2017 3:08:44 GMT -8
That's a neat project !
|
|
|
|
Post by gregory on Mar 18, 2017 6:10:00 GMT -8
I made the canister using a Ring Master, great machine to create with as you can see by this other canister Attachments:
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 18, 2017 7:37:07 GMT -8
Looks good, I sold my ringmaster. I must have gotten a defective one because every thing I did on it was out of round just enough to make it wobble like crazy when trying to sand on the lathe, after 2 of them exploded on me I let it go.
|
|
