Lathe Option - Similar to the 1010

Not at this time. I wish there was. I'm going to try doing a little project on my own that would give me a three dimensional result.....1. Drill a tiny hole through the piece at the "Home" position. 2. Carve a piece to a depth about 1/2 way through the wood. 3. Flip the wood, and use the location hole to find my home position and then carve an inverted picture of the piece. In my weak mind, that should give me a piece I could take to the jigsaw and finish carving around the piece - a two sided version of whatever. Not sure it will work, and the item being carved can't be too intricate (in my thinking), but it's a fun project for a cold winter.