|
|
Post by jgstang on Feb 28, 2018 14:13:10 GMT -8
Hi guys, Jeremy @ iconic is trying to help configure the 1013 with the new m-board i got from them..
i turn the machine on with no fd and press enter untill select,go down to configuration press enter
go to M3 code open and enter and arrow turns to a block
press enter again and its suppost to flash the block and it does not.
so i move on like he said and press in order x- x+ y- y+ and that takes me to the codes and thats it... will not let me choose/press any of the codes to save (FH) no key works but back
THANKS
|
|
|
|
Post by jgstang on Feb 28, 2018 17:06:10 GMT -8
got it working but spindle still is not smooth, alittle jumpy but the carve looks good..
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 1, 2018 16:41:40 GMT -8
When you say the spindle is not smooth, do you mean it's spin or x axis movement?
This is like nothing I've seen so far, or am likely to be much of a help with. I haven't actually used my 1013 in a few months, been busy making furniture for the kids and redoing the molding in my house and my son's.
rick
|
|
|
|
Post by Horus on Mar 5, 2018 22:07:51 GMT -8
Hi , would you please help me to make greyscale 3d for my cnc The intelliCarve machines, model 1015 ?
please contact me on : G.booking1@gmail.com
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 6, 2018 15:03:01 GMT -8
Hi , would you please help me to make greyscale 3d for my cnc The intelliCarve machines, model 1015 ? please contact me on : G.booking1@gmail.com |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 16, 2018 1:53:34 GMT -8
Hi , would you please help me to make greyscale 3d for my cnc The intelliCarve machines, model 1015 ? please contact me on : G.booking1@gmail.com |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 18, 2018 3:30:42 GMT -8
Try setting up a yahoo account that you'll never use and email him. I used to have one, but don't know what it is anymore.
|
|
